Model #79095592100 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Oven will heat to proper temp, but will not hold it 79095592100 Kenmore Electric range

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your range. Upon researching model 79095592100; you can unplug the range power cord and remove the heating element and the oven temperature probe when the oven is not hot. With the parts removed you can test the parts for continuity using a multi meter, if any of the two parts test reads no continuity then that part may need to be replaced. If both of the parts test reads continuity then you may need to replace the electronic control board.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
June 30, 2015
Q:

need help 79095592100 Kenmore Electric range

A:

Thank you for contacting SearsPartsDirect.com with your question about your Kenmore Electric Range. I am sorry you are having problems with it. I will be happy to help.

Your question didn't indicate what type of issues you are having with the range. To reset the range disconnect the power supply source to the range for a couple of minutes. Once you reconnect the power press the cancel button to clear the display. Then reprogram the range in accordance with the instructions in the owner's manual. I have included the link for you to view the manual online in case you don't have a copy. 

Owner's manual for Kenmore range 79095592100. 

Hopefully this will resolve whatever issue you are having with it. If the problem persists and/or you get an error code in the display, please resubmit your question with additional details and we will be happy to help you further.

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
March 14, 2014
Q:

RECALLED ?? Purchased Kenmore Electric Range Model # 790.95592100 SN vf13511019

A:

I understand the concern with wanting to know if your range was recalled. While you are waiting for an expert to respond, I have attached a helpful links below that may provide information to assist you with your question.

Read More
Yadira B -
September 24, 2012
A:

I checked that Kenmore range model 790.95592100. It does not have any recalls. The other models that you listed have a relay control board for the surface burners. The model 790.95592100 uses burner switches on the console to control the surface elements. That is why the model 790.95592100 differs from those models and does not have a recall or any known issues regarding the surface burners.

If you need more help or have further questions, let us know.

Read More
Lyle W -
Sears Technician
September 25, 2012
A:

Lyle W. The problem was not with the burner it was described as the oven/broiler not turning off and the part replaced for this problem today was the relay control board. I am going to check parts for the recalled ovens to the part number replaced today. Either way it is a safety issue as the oven/broiler would not turn off unless the circuit breaker was tripped

Read More
rjdemaio -
September 25, 2012
A:

Hello rjdemaio. I understand your concern about that failure. Your range has apparently suffered a failure in the digital electronic oven control board in the console that houses the relay for that broil element. I posted a diagram below that shows the circuit through the broil element. That element is connected directly to the L2 leg of electrical power at all times. (The bake element is also connected directly to that L2 leg of power.) In your model of range, A failure of that broil relay in an electrically "closed" position will apply the L1 leg of power to the element so that it will heat constantly. The same applies for the bake relay. Some ranges have a relay that also controls the L2 leg of power but this model of range does not have that feature. The configuration show in the image below is used on many ranges. I hope that this explanation of the failure that you are describing helps you understand what went wrong in the range to cause that broil element to heat constantly. That element will also heat constantly but to a lesser degree if the element breaks and shorts out to the metal cabinet inside the oven cavity. Although this failure occurred in your particular range, it is not a common and widespread failure. It rarely occurs. I checked thoroughly for any recalls or common problems on that particular control board. I did not find any common problems on that part or model of range. I understand and agree that this is a safety concern. Based on the components and the wiring configuration, it is possible (though highly unlikely) that the failure could occur again at any time. There is an inherent nature in this appliance and similar cooking appliances that a failure of an electrical relay can occur that would cause an element to heat constantly. Other safeguards such as sensors and house circuit breakers will normally prevent a larger tragedy such as a house fire. (Continued below)

Read More
Lyle W -
Sears Technician
September 26, 2012
A:

In your situation, I doubt that you will encounter this type of failure again during the life of that range. When you purchase a new range, I recommend that you buy one with a "double line break" relay. That type of range will have the second relay for the L2 leg of power on the electronic oven control board that will prevent the oven elements from getting that L2 leg of power unless the control is set in the bake or broil mode. That will normally prevent the element from heating at full power if you have a failure in that L1 relay. It would be extremely rare for 2 relays on a control board to fail at the same time. That being said, relays on an electronic control board can fail at any time even though it is extremely rare. I hope that this information helps. If you decide to replace the range at some point in the future and you need help finding one that has double line break relay, I encourage you to seek our help. We will be glad to assist you. If you have further questions or need more help, let us know.

Read More
Lyle W -
Sears Technician
September 26, 2012
See more answers

Top Parts