Model #79095422301 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Electric Oven Heating Elements not getting HOT?????

A:

I am understanding your concern over the issue that you are having with your range. I was able to find an experts response to a similar issue. He provides enough information to check on a few things but he also asks for more details. If you don't find this to answer you question add further detailed information on to this thread and the expert will answer as soon as possible.

Read More
celene -
February 01, 2011
A:

I recommend that you check the house circuit breakers or fuses for the oven first. If the circuit breakers (or fuses) are okay, then I recommend that you shut off the circuit breaker (or pull the house fuses) for the oven and check the thermal circuit breaker on the back panel of the oven. This thermal circuit breaker could be tripped and this would prevent the elements from heating. The first image below shows the wiring diagram with the thermal circuit breaker circled in green. The second image shows the physical location of this circuit breaker on the back of the oven. You will need to pull the oven out of the cabinet to access this component. This thermal circuit breaker has a red reset switch. Press that button and reassemble the oven. Restore power and see if the elements will heat.

This will likely solve your problem. If not, then you could have a voltage supply problem through the junction box or a problem with the electronic control board.

Be sure that you shut off the circuit breaker to disconnect electrical power from the oven before accessing internal components.

Reply with additional details if you need more assistance with this problem.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 03, 2011
A:

Where would I find the thermal circuit breaker on Model#790.95422301? Is this pretty much standard?

Read More
John -
June 19, 2011
A:

Hello John. I just ran into this reply. Sorry that I did not reply sooner. That range does not have a thermal circuit breaker. You can use the troubleshooting in this link for a previous answer to diagnose and repair an element heating failure in your model of range: Question: model # 79095889301 no heat on bake or broil

Read More
Lyle W -
Sears Technician
December 06, 2011
See more answers
Q:

oven does not work

A:

I use my oven to cook up some delicious baked goods so I know how important it is to have the broiler heating up properly. Below is a link in where you can find some good information to help you with your question. I hope this helps while you wait for your expert answer.

Read More
Joseph P. -
September 19, 2011
A:

Thank you for your question and I understand your concern.

Based on your symptom and details; the oven control board has most likely failed. It has an L2 relay on it which has likely failed in order to complete the L2 voltage to the bake and broil element. You will need to replace the electronic oven control board. You do not need to replace the whole control panel, just the control board. It can be removed and replace by removing the panel from behind the console. NOTE: Disconnect the power cord from the power source before removing the panel. The control board is part#316557511 and can be ordered at Sears PartsDirect .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post

Read More
Joey S -
Sears Technician
September 21, 2011
See more answers
Q:

My oven stopped heating up, but the rest of the range works fine. Kenmore model 79095422301

A:

I'm sorry about the difficulties that you are experiencing with your oven. I did some research at managemylife.com and found an expert answer to a similar question that may assist you until your expert can respond. I have attached the link below. If you would like assistance from a qualified technician I have also attached a link to searshomeservices.com. I hope these links will help until your expert can respond.

Read More
James -
January 05, 2011
A:

I know it's frustrating when the oven stops working. The information you have received is correct except the element in this model is # 316202200. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
January 07, 2011
See more answers

Top Parts