Model #79095412104 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a Kenmore Electric range model 790.95412104. Power surge knocked out my control panel. It will only display the clock when I turn on one of the burners

A:

I know how important it is to have a good working range in the home so that you can cook up a nice meal. I am adding a link below to help you with your range problem. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
January 18, 2012
A:

Thanks but I think I've looked at every post from here to Mars. No luck yet.

Read More
bernsaved -
January 18, 2012
A:

According to your symptoms, you almost certainly have a voltage supply problem with the range. You are apparently missing the L1 leg of supply voltage going to the range. The wiring diagram for your range is shown in the first image below. When a surface burner is turned on, you are completing a path for the L2 current that is traced by the red line in that wiring diagram. That is why the control will only light up when a surface burner is turned on.

I recommend that you check both of the house circuit breakers or house fuses for the range. If the breakers are okay, then I recommend that you carefully check the voltage at the outlet using a volt/ohm meter. The second image below shows a drawing of a typical range outlet with the voltages marked. NOTE: You should only check this live outlet voltage if you are completely confident in your technical ability to safely measure it. Wear proper safety equipment (insulated rubber electrical safety gloves and safety goggles) when checking that voltage . If your outlet has the correct voltage, then you could have a problem with the outlet cord or the wiring on the terminal block of the range.

These tips should help you diagnose and repair this range failure. If you need more assistance, reply with additional details.

If you need parts, you can order them from the Sears PartsDirect website.

If you get to a point where you need to have a service technician examine and repair the range, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 19, 2012
See more answers

Top Parts