Model #79095411102 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


Why won't my oven door unlock after the self cleaning cycle.


You model range should have displayed a fault code of "F9" if it had detected a problem with the Door Latch Motor Assembly. Is the "Door Lock" light on? Is the oven still too hot?

Most likely it has loose wire or a failed door latch motor or possibly a failed Electronic Range Control board.

The door could have too much friction on the door latch too. Try pushing inwards and keeping slight presser on the door while pressing the Off/Clear button. The door may unlock if there was too much friction.

If the door will not unlock I recommend calling a service technician to diagnose and repair your oven.

Read More
Joey S -
Sears Technician
July 11, 2008

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show