Model #79095353800 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Glass stove top 79095353800 Kenmore Electric range

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your range. Upon researching model 79095353800: I know it can be frustrating to experience problem with your range. If the range controls are unresponsive you may need to replace the electronic control board. The electronic control board governs the functions of this unit, so when the control board fails it can cause the controls to become unresponsive. I have posted a link of the electronic control board to view the control board click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
June 17, 2015
Q:

Does not heat 79095353800 Kenmore Electric range

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when the oven or stove will not heat.
 
Glad to help out.   Im  looking at your Kenmore Range  model number 79095353800.
 
Please first reset the circuit breaker in the power box to make sure we have 240 volts going to the range. Turn the breaker for the range off for about 3 to 5 minutes and see if you have the same trouble.

With both the stove top burners and the oven burners not working sounds like one of two possibilities.   Either the control clock needs to be replaced or you have a wiring probelm.   There could be a faulty wire connection in the L1 or L2 voltage supply or a faulty connection in the Neutral supply. The voltage supply should be checked and monitored while turning the knob. You may need an electrician and/or an appliance technician to diagnose the failure.

Take a look at the control board.   Usually you can look at the wire connections and see if there are any burnt, or bare wires that could be the cause.   If not then most likely you need the new control board and the overlay that lays in front of the control board.

Control board part #316557118
Overlay part #316419109
 
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
July 11, 2014
Q:

oven element 79095353800 Kenmore Electric range

A:

 
Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when needing help with the range.
 
Glad to help out.   Im  looking at your Kenmore model number 790.95353800.

The top "Broil element" just unscrews with a screw on each side/stem.   The "Bake element" for the bottom is covered so you need to remove the two screws on the back side of each corner and then lift it right out to get to the bake element.  I have a picture below that I hope will help out.   The cover is key number 8 and the screws is key number 43.   Good luck

RAnge picture of elements for model 790.95353800

If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com
 

Read More
Larry L -
Sears Technician
February 12, 2014

Top Parts