Model #79095321303 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Oven stopped working 79095321303 Kenmore Electric range

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your oven and I do understand your frustration. Glad to help out. I'm looking at your model number 79095321303 and from your description I suspect that the clock/timer controller has failed. A clear indication of a failed timer is that the oven will not work at all and all the top burners will work. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
November 04, 2014
A:

My oven was preheating and there was a popping noise. The oven/broiler does not work, nor the clock, timer or time. What part do I need? the controller? Do I need a repairman or is it something I can replace?

Read More
Anonymous -
December 17, 2015
See more answers
Q:

Kenmore cook top oven stopped working 790.95321303

A:

Good morning... I can fully understand your concern regarding this issue of your oven making a popping noise. Resetting your cook top is easier then you know. I did locate a link that will review what to do in greater detail. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your cook top and have a nice day.

Read More
Henry -
April 16, 2013
A:

Thanks for the information about your range/oven model 790.95321303, I will be glad to assist you with this issue. Based on the description you provided I have attached an image that explains the error codes and how to solve the codes errors.  You will need testing equipment for some tests, if you do not own testing equipment or choose to have an experienced technician out I have a link for service here. Sears Home ServicesIf you need more help reply with added details and I will be happy to respond.  Ron H.

Read More
Ron H -
Sears Technician
April 17, 2013
A:

Is there a way to reprogram the oven, and can you give me detail on how to check the EOC and RTD? The oven will turn on, but it is not heating at all. What does RTD stand for?

Read More
Wendy -
April 17, 2013
A:

Hello Wendy, I have attached an image showing and instructing how to test the RTD (oven temp sensor) it has a ohms scale, and also instructs how to test the control. You will need a high quality volt/ohm meter to make these tests as I indicated in previous post. Ron H.

Read More
Ron H -
Sears Technician
April 18, 2013
See more answers
Q:

kenmore oven not heating up on bake or broil.

A:

Good afternoon... I can fully understand the frustration of not having an oven to bake with. It would be really helpful to the expert if you could also send us your full model number. I did a general search and located two links that may be helpful. Also keep in mind that an expert will also be investigating the matter further. You should hear from them within the next two business days if not sooner. I hope this helps and have a nice evening.

Read More
Henry -
November 08, 2012
A:

hi, and thanks the model number is 790.95321303

Read More
william housley -
November 08, 2012
A:

just a foot note, when i check the voltage on the bake side, i got 120v from one side of the element, but when i put the meader leads together on the same element one left and on the right, it showed no voltage.

Read More
william housley -
November 08, 2012
A:

Thank you for your question and I understand your concern.

First make sure that the bake or broil element has not burnt out and shorted to ground. If one has, it will normally take out the electronic oven control board.

Based on your additional information in your last reply, the electronic oven control is likely faulty. The bake and broil elements require 220 volts. When measuring across the two element leads, it should measure 220 volts. You stated it read it read 120 on one side but not the other so I must assume the wires were disconnected and measured across one wire to cabinet ground. I say this because if the element was good and connected and only one wire had 120 volts, it should have measure 120 on the other side. The element requires two lines of voltages. It needs Line One (L1) and it needs Line Two (L2) voltages. When measuring across the two leads, it must measure 220 on the element will not heat. So, if you do not measure 220 volts across the two wires connected to the bake or broil elements, the range my not be getting the 220 volt power supply, or the electronic oven control is likely faulty. I added an image below of the wiring diagram and I traced the oven circuit in red and black. When measuring across red and black it must measure 220 volts.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
November 09, 2012
A:

Hi and thanks for the info, im sorry what i ment to say is i get 120v from the left side and the right side but to gather on one element there is no reading .

Read More
william housley -
November 11, 2012
A:

William Housely: The voltage must measure 220-240 when measuring across two leads connected to the bake and broil elements. Make sure the range is getting the proper voltage supply where it connects to the back of the range. The voltage must measure 220-240 when measuring across the two outside terminals. The electronic oven control controls the Line one and Line two voltages to the bake and broil elements. See image in my first response. You will likely find a faulty electronic oven control.

Read More
Joey S -
Sears Technician
November 12, 2012
See more answers

Top Parts