Model #79095302101 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore Electric Range Model #790.95302101

A:

Having your appliance not working correctly can be really annoying. While you are waiting on an expert to answer your question, I suggest you set service with a Sears technician. I have attached the link below. Hope this helps!

Read More
Dezeray S -
April 10, 2012
A:

Thank you for your question and I understand your concern.

Based on your symptom and details the bake or broil element may have burnt out and shorted which can also take out the electronic oven control. Since the broil element is turning on when the range is reconnected to power; the broil relay points have likely welded closed. This will mean the electronic oven control/clock assembly will need to be replaced.

The first thing to do is disconnect the power cord from the power source and inspect the bake and broil element for any signs of cracks or blisters. If they appear normal, the electronic oven control will need to be replaced. The oven control part #316207522 for Kenmore electric range model 790.95302101 can be ordered from Sears Parts Direct.

The oven control/clock is replaced from the back of the range. The panel behind the console will need to be taken off to access and replace the oven control. The oven control is fastened by 4 screws; one at each corner to remove. Make a note of where all the wires are connected before disconnecting the wires so you know where to reconnect them.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
April 10, 2012
See more answers
Q:

Why is a radiant burner heating erratically on my Kenmore range?

A:

Since the element does heat, your likely failure is in the burner infinite switch (part 316021501). Replacing this burner switch should fix your problem.

If you replace this switch yourself, be sure that you unplug the range before accessing internal components. You can pull the knob off of the switch and access it by removing the upper back panel of the range. NOTE: Internal metal edges on the range can be sharp. Protective gloves are recommended.

Be sure that you note the locations of the wires on the original switch before removing them. Take a digital picture to document the location of the wires if necessary. Shift the wires to the new switch and mount it in the console. Reassemble and test the range.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 18, 2010

Top Parts