Model #79095212200 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

oven element wouldn't turn off What is wrong? 79095212200 Kenmore Electric range

A:

Thank you for your inquiry on your Estate Washer, Model: TAWS850PQ2.  From reviewing the details on your model, based on your description, you probably have a stuck relay on the electronic oven control board in that range. You could also have an element that is broken and that is shorting to the metal cabinet inside the oven cavity. With the range unplugged you can examine the bake and broil elements for visible damage. If an element is broken, it will need to be replaced.If you see no visible damage to the elements, you can check them with a volt/ohm meter. The elements in that range should measure between 10 and 40 ohms of resistance. If an element is bad, it will need to be replaced. If the elements are okay, then you failure is likely in the electronic control board that is housed in the console of the range. The element that is staying on probably has a bad relay. In that situation, you will need to replace that electronic clock control board.

Safety Warning: Before beginning the repair, disconnect the direct power supply to the range to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 07, 2015
A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your range. Upon researching model 79095212200; this may help you fix that problem yourself if you are interested in that information. Based on your description, you probably have a stuck relay on the electronic oven control board in that range. You could also have an element that is broken and that is shorting to the metal cabinet inside the oven cavity. With the range unplugged you can examine the bake and broil elements for visible damage. If an element is broken, it will need to be replaced. If you see no visible damage to the elements, you can check them with a volt/ohm meter for continuity. The test should read continuity if not then the element may be the problem part. If the elements are okay, then you failure is likely in the electronic control board that is housed in the console of the range. The element that is staying on probably has a bad relay (K-2 or K-4 relay on that control board). In that situation, you will need to replace that electronic clock control board.

 

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

Read More
CarlosZ -
Sears Technician
April 07, 2015
See more answers

Top Parts