Model #79095044501 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Electric Oven will not heat up

A:

I understand that your electric oven is not heating up. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
December 16, 2011
A:

Thank you:)

Read More
Tiffany Beining -
December 16, 2011
A:

Since the control board powers up and the cook top burners work, you are correct that a tripped house circuit breaker or voltage supply failure is not causing this oven heating problem.

The L1 voltage supply to the clock control board (traced in green on the second image below) is apparently okay if the clock control board has power. That is actually a black wire even though it is traced in green.

The first image shows the oven element circuits traced in wire colors. The 120 volt L1 side of 240 volt power going to the elements is delivered through the blue wire for broil and the yellow wire for the the bake element. The orange L2 OUT wire delivers the other 120 volt leg of 240 volt power. Your symptoms point to a wiring failure or a bad clock control board. You can unplug the range and check those wiring connections on the back of the clock control board. This link for a brief repair video shows how to access that clock control board on your type of range: Range Clock Control Replacement . You don't have to remove that clock control board yet. Just access the back of it and check the red and orange wire connections. If those wires are properly connected, check the control board for burned marks or apparent damage. If you see a burned spot or obvious damage, then that clock control board (part 316455420) will probably need to be replaced. That part costs around $80. Here is a direct link for that part: Range Clock Control . You may also need the overlay (part 316220713) unless you can reuse the original one as shown in that repair video. Be sure that you unplug the range before accessing internal components.

This information may help you fix this oven heating problem on your own. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you may need to have fixed by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 19, 2011
See more answers

Top Parts