Model #79095039702 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

kenmore top burners work but not the bake or broil

A:

A non working Oven is not something any of us want to see. If you are technically handy, this is a good site to get instruction and fix some things yourself. If you do not feel confident doing your own repairs, an option is to visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom links for some possibilities. Hope this is of help.

Read More
Priscilla V -
February 01, 2012
A:

Thank you for your question and I understand your concern.

I added a link below with an answer to your question.

kenmore stove oven/broil wont work

This may be the issue. If not, please reply and I will be glad to assist you further.

Read More
Joey S -
Sears Technician
February 03, 2012
See more answers
Q:

kenmore stove oven/broil wont work

A:

A non working Oven is not something any of us want to see. If you are technically handy, this is a good site to get instruction and fix some things yourself. If you do not feel confident doing your own repairs, an option is to visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom links for some possibilities. Hope this is of help.

Read More
Priscilla V -
February 01, 2012
A:

Thank you for your question and I understand your concern.

Based on your symptom I would suspect a faulty electronic oven control/clock assembly. The electronic oven control (EOC) is part #316455420 which can be ordered from Sears PartsDirect .

I also recommend inspecting the bake and broil element for any signs of it being burnt out. Look for cracks or blisters on the heating elements. If a bake or broil element happens to burn out/short, it can cause the oven control to fail. So, make sure the bake and broil elements appear okay before installing the control board.

The oven control/clock assembly can be access and replace from the rear of the range. Remove the panel from behind the console to access the control board.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
February 03, 2012
See more answers
Q:

how to repair my kenmore stove

A:

A non working Oven is not something any of us want to see. If you are technically handy, this is a good site to get instruction and fix some things yourself. If you do not feel confident doing your own repairs, an option is to visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom link for some possibilities. Hope this is of help.

Read More
Priscilla V -
February 01, 2012
A:

If bake and broil stopped working at the same time, the problem will be a broken wire to the elements or a bad electronic oven control (clock). To test the clock you need a volt/ohm meter. If you have a meter and want to troubleshoot the range, reply on this thread and I will be glad to help.

If you are not comfortable testing the range, you can go to Home Services and get a Sears technician to repair the range.

Read More
Jimmy K -
Sears Technician
February 02, 2012
See more answers

Top Parts