Model #79095034503 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Both oven broiler and oven elements not working. 79095034503 Kenmore Electric range

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the range.

Glad to help out.   Im  looking at your Kenmore model number 790.95034503.



Instructions on testing your elements:
 
1.  Unplug your range-disconnect the power.  Drop the door down gently.  Check one at a time and unscrew the bake element at the bottom first.
 
2.  Sometimes you can just look at the element so inspect it for things like signs of wear, charring, blistering, or breaks then you automatically know to change it.
 
3.   When you take the elements out then you can also verify if they are connected well from the wires to the elements.  If loose wire then maybe all it needs to do is be reconnected.
 
4.  Once out test the elements with a multimeter and you can find out its continuity.  Set  your meter to the lowest setting of homs, then calibrate the meter following its instructions.  Touch one terminal on the element with one of the probes and touch the other element end with the other probe.  Look at the meter's display to determine if it has and how much ratings.  The reading should read anywhere from 0 to 50 ohms of resistance if it is good.  If not then you know to replace it.

I would also check the wiring first.    Now are they both not working?   Or just not heating at the right temperature?
If both aren't working and check the wires at the elements and also up at the board then would have to assume that it will be a new board that you will have to replace.


If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
January 14, 2014
Q:

79095034503 electric range oven and broiler won't work. neither oven nor broiler work. would be unlikely (but possible) that both elements died at once. Would

A:

Good afternoon.... exceedingly unlikely that both elements would fail at the same time. I can fully understand your concern regarding both elements failing. I did locate a link that will discuss this situation in greater detail. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction.I hope this link will help guide you as to what might wrong with your oven and have a nice day

Read More
Henry -
December 23, 2012
A:

Based on your description, it is likely that the electronic oven control board has failed. It is extremely unlikely that both the bake and broil elements would fail at the same time. I recommend that you unplug the range and visibly check the bake element and broil element in the oven. If one of those elements is broken, then it could have damaged that electronic oven control board. If the elements appear to be okay, then you can probably fix this failure by replacing that electronic oven control board (Key 20 on the parts drawing in the image below). You can order that part from this page: Kenmore Range Model 790.95034503 Parts . You will normally need to replace the overlay (Key 20A) at the same time that you replace that electronic oven control board. Be sure that you unplug the range before accessing internal components and replacing parts.

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 24, 2012
A:

I am having the same issue mention above. The only thing is I removed the back cover and tested the power to the heating element and measured 120volts. Shouldn't it be 240? I also verified I was getting 2 120volts off of each leg to the stove. I also checked the heating elements and they both measured about 20ohm so they should be fine. Do i also need a new control board? thanks for the help.

Read More
glenn -
January 09, 2014
A:

Hello Glenn. I assume that your stove top burners are heating properly. If not, then you could have a voltage supply problem. If the surface burners heat, then you either have a problem with the wiring in the circuit or the electronic control board (part 316455420 for model 790.95034503). If you have to replace that control board, then you may also need to replace the overlay (part 316220713). Unplug the range before accessing internal components. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
January 10, 2014
See more answers
Q:

Can you tell me how old my electric range is with the model and serial #?

A:

When looking to find some detailed information about an appliance, Manage My Life is here to help. I am adding a link below in where you can find the information to help you with your question. I hope this helps!

Read More
Joseph P. -
September 19, 2011
A:

This range was manufactured the 31st week of 2006. I hope this helps.

Read More
Korinna S -
Sears Technician
September 20, 2011
See more answers

Top Parts