Model #79094342700 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Oven will not heat correctly. Model 790.94342700 Kenmore Electric range

A:

Thank you for contacting SearsPartsDirect.com with your question about your Kenmore electric range model 790.94342700. I am so sorry the range will not hold a constant temperature. I will be happy to help you with this.

You question does not mention why you replaced the oven control to correct the temperature issue. Did the display panel show a fault code? And if so, what code was displayed?  I have included the link below for you to view the Error Codes for your range. 

Kenmore Range Error Codes for Self-Cleaning Electric Ranges, 2004 to Current 790 Models 

If display shows one of the codes list, the link will show you what will need to be tested and the corrective action. If you are not comfortable completing the tests and the repair yourself, you can set up service at www.SearsHomeServices.com or by calling 1-800-4MY-HOME (1-800-469-4663.

I hope this answers your question. If we can be of further assistance, please resubmit your question with additional details. Thank you for being a Sears' valued member, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
August 11, 2014
A:

There was no code. It wasn't heating correctly and the Q & A suggested replacing the oven/timer part. After replacing the part. Same issue existed.

Read More
John -
August 11, 2014
A:

no error code. replaced probe same issue. won't heat consistently?

Read More
John -
August 14, 2014
See more answers
Q:

Electric range

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
November 24, 2011
A:

The F10 code indicates that the clock control board in the console detects a "runaway temperature" (out of range high temperature). According to your symptoms, this is likely due to that boiler element coming on during the oven bake mode. You probably have a stuck broil element relay on that clock control board. Replacing that clock control board will probably fix this failure. You can order that part from the Sears PartsDirect website. The part number for that clock control board is 316557118. Here is a direct link for that part: Clock Control Timer . Be sure that you unplug the range before accessing and replacing that clock control board. Here is a link for a brief repair video that shows how to replace that clock control board: Range Clock Control Replacement . You may need to order that clock overlay unless you can reuse the original one as shown in that repair video.

This information should help you fix this oven problem in your range. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
November 27, 2011
See more answers
Q:

Kenmore Electric Range Baking Cycle

A:

Oven temperatures need to be correct for all the holiday baking. If the oven just needs to be recalibrated, check out the first link. I also found a similar question from a previous expert post that may have some useful information. The model is a bit off but it may help while you wait for the expert. I also added the owner's manual. The troubleshooting guide may help. Hope your oven is holiday ready soon.

Read More
Barbara H. -
December 11, 2010
A:

The bake element in your range is a "hidden" element. If you have not already removed the oven bottom, you need to remove it to test the element.

Remove the oven door (I am sending an image with instructions) and the oven racks.

Remove the 2 thumb screws in the rear of the oven bottom panel and lift the panel at the rear about 1-2 inches. Slide the oven bottom to the rear of the oven to unhook the front edge and lift it out of the oven.

Inspect the bake element for breaks or rough areas on it like bubbles. If the element has shorted it will have a rough area. If you find a break or rough area, replace the bake element.

If the bake element is not rough or broken test it for heating. Set the oven on bake and 350 degrees. Close the door and wait 5 minutes and the bake element should be slightly or bright red.

Your bake element, electronic oven control (clock), or a broken wire could cause the oven to not heat correctly. If you have more questions reply on this thread and we will try to help.

Read More
Jimmy K -
Sears Technician
December 13, 2010
See more answers

Top Parts