Model #79094329301 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Range not working right 79094329301 Kenmore Electric range

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the range.
 
Glad to help out.   Im  looking at your Kenmore Range model number 79094329301.

I would turn the fuse on and off again.   Here is the way to check the elements in the oven.

TESTING ELECTRIC RANGE ELEMENTS:
 
1.  Unplug th oven from the wall outlet.  
 
2.  Remove the racks from inside when you have the oven door opened.  
 
3.  The elements have a screw on each side and need to remove the screws and pull the wires from the
    elements out.
 
4.  Turn the dial on a multimeter to Rx1k.  Place one lead from the meter on the terminal at the end
    of the element, then place the other lead on the end of the other termial.  The needle on the
    multimeter should register between 19 and 115 ohms.  Replace the element if no reading registers
    on the meter.
 
5.  If the elements are good then take the meter and test both wires that you hook to the bake/broil
    elements.

Hit STOP/CLEAR PAD - Used to clear any function previously entered except the time of day and minute timer.   Press STOP/CLEAR to stop cooking.  Clear it from past readings.   

Restart as if cooking and re-heat the oven.   See if you are having the same trouble and see if there is an error code that comes up.

Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs. Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
March 12, 2014
A:

Like I said before elements tested good. When I turn breaker back on the oven door wants to lock and the display read "100 degrees" and the lock door light is flashing. I tried pushing stop/clear and nothing happens. I try pushing other buttons and nothing happens.

Read More
Andy -
March 12, 2014
See more answers

Top Parts