Model #79094321300 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Oven will not heat 79094321300 Kenmore Electric range

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your range. Upon researching model79094321300; based on the information provided, it sounds like you may have to replace the oven control board. The control board governs the functions of the oven such as the broil and bake features, so when the control fails it can prevent the oven from working. I have posted a link below of the oven control board key#20.

I trust this information will help you, Thank you for choosing Sears.

Read More
Jeff Wallace Jr -
Sears Technician
December 02, 2014
Q:

Kenmore Electric Range Model # 790.94321300 79094321300 Kenmore Electric range

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

Replace defective EOC on electric kenmore range

A:

Replacing the electronic control on the Kenmore range is made easy with help from an expert. This information has been requested and provided in the link below. Hope this is useful while an expert responds with additional information.

Read More
Anna T -
October 19, 2012
A:

I posted a procedure for replacing the EOC (Electronic Oven Control board) in the first image below. Be sure that you unplug the range before beginning that repair.

Remove the back panel behind that console to access the back of that EOC. NOTE: The metal edges on that back panel are sharp. Protective gloves are recommended for this repair.

Note the locations of the wires on that original control board before removing them. I posted the wiring diagram and some reference material in the second image in case you need it to check the wiring connections when you install the new control board.

Once you disconnect the wires on the existing control board, you can remove the 4 screws that mount that control board in the console (shown in the first image). When you pull that control board out, you may be able to peel off and reuse the overlay. If not, then you will need to order a new overlay for the control board. You range appears to be black. Here is a link for the black overlay on that range: Black Overlay for Kenmore Range Model 790.94321300 . You can order that part from that page if necessary.

I hope that these tips help you replace that EOC. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
October 20, 2012
See more answers

Top Parts