Model #79094213400 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

NEED A WIRING DIAGRAM

A:

The wiring diagram is in the image below.  I hope this is helpful to you.  If the image does not enlarge then let me know and I will send it via plan B. 

Read More
Fred M -
Sears Technician
September 30, 2013
Q:

I have a kenmore stove that won't work

A:

Having your Washer not work can be quite disappointing as well much of a concern. I have taken the time to research on the Manage My Life website and I have found some useful information on the error code. While you are waiting on your reply from your expert I have attached a few links below if you would like to take the time to view. Hope this information is useful.

Read More
Dezeray -
October 10, 2012
A:

Thank you for your question and I understand your concern.

The "F11" fault implies a shorted button switch on the electronic oven control/clock assembly. Disconnect the power cord or flip the circuit breakers off dedicated for the range; wait 30 seconds and reapply power. If fault returns upon power-up, replace electronic oven control (EOC).

You can order the electronic oven control #316557118 from Sears Parts Direct. You will also need to order a new oven control overlay #316419109 to stick over the face of the control before installing. The control can be removed and replaced from behind the range. Disconnect the power cord before removing the panel from behind the control panel.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
October 11, 2012
See more answers
Q:

We're cooking our turkey in the oven and an "F10" is being displayed in the timer window.

A:

A working oven on Thanksgiving is definitely something we depend on and if it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Barbara H. -
November 24, 2011
A:

Thank you for the model number. On this model range F10 indicates the control detected a runaway oven temperature. The suggested repair tips are to disconnect power for few minutes or ohm out the temp sensor with a meter. If the unit operates correctly no further service is needed unless you see the error code again. If you do I recommend checking the temp sensor. For further assistance, please respond to this thread with more information.

Read More
Korinna S -
Sears Technician
November 25, 2011
See more answers

Top Parts