Model #79094212409 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Repair "simmer burner" switch on Kenmore Range model 790.94212409 79094212409 Kenmore Electric range

A:

Thank you for your qeustion and I understand your concern.

Based on the details provided, you have the switches connected correctly. Based on your details, the simmer select control board is faulty and will need to be replaced. The simmer select control board is part #316429301 which can be ordered from Sears PartsDirect.

I hope this helpful. If you need any further assistance let us know.

Thank you.

Read More
Joey S -
Sears Technician
February 13, 2014
Q:

Assistance with Kenmore electric range

A:

I'm sorry to hear that you are having some difficulties with your range. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Joseph P. -
November 09, 2011
A:

Thank you. I will give it a try.

Read More
Anonymous -
November 10, 2011
A:

If the time of day is just going blank, you can try to resolve your problem by following the procedure shown in that link for a previous answer that Joseph P. posted in the above response. Press and hold the Clock icon for 15 deliberate seconds and the time of day display may appear and stay lit. If that is not the problem and the control will not operate properly then you will probably need to replace the clock control board in that range. You can order that component from the Sears PartsDirect website. The part number for the clock control board is 316557118. Here is a direct link for that part: Clock Control Board .

Here is a link for a repair video that shows how to replace that clock control board: Video: Range Clock Control Replacement . You may need to order the overlay for that control if you cannot reuse the existing one as shown in that video. Be sure that you unplug the range before accessing internal components.

This information should help you resolve the oven control problem in your range. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
November 11, 2011
See more answers
Q:

Is the 1.5" ceramic disk with holes that is in the oven vent tube needed?

A:

You can use the oven for regular baking and broiling until it is replaced. I don't recommend running a self clean cycle without the disc in place. I do recommend ordering and replacing the disc.

Read More
Lyle W -
Sears Technician

Top Parts