Model #79094032702 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Replace bake element 79094032702 Kenmore Electric range

A:

Hello, glad to help.  Thank You for choosing Sears PartsDirect.com.
 
I am sorry and do understand your frustration when doing repair work on the range/oven.
 
Glad to help out.  I’m looking at your Kenmore Range model number 79094032702.

The bake element is held in by 2 screws.  One on each stem of the bake element bracket.   Just need to unscrew those screw and pull the bake element out slowly.   

Next unhook the bake element on each ends, one at a time.   Be careful that the ends do not fall back into the oven.   

Pull the old bake element out and put the new one in.   Put the wires on the bake element securely.   Slide it back into the oven, screw the element back on to the rear oven wall and you are all set.
 
 
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry Jr -
Sears Technician
August 05, 2014
A:

Hello, glad to help.  Thank You for choosing Sears PartsDirect.com.
 
Glad to help out again.    

I am sorry but I was telling you how to remove and change the bake element without looking at your particular model.   On this model you have the bake element covered.

There are 2 screws at the rear plate on the bottom.   YOu need do unscrew the screws on each side of the back, bottom plate panel first.   Then follow the steps that I just gave you.   Good luck.


Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry Jr -
Sears Technician
August 05, 2014
See more answers
Q:

Burner is too hot 79094032702 Kenmore Electric range

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
December 06, 2013
Q:

error code 79094032702 Kenmore Electric range

A:

Thank you for choosing SearsPartsDirect.com. I understand how frustrating it can be when the oven does not work. The DR code indicates a malfunction in the door latch. I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.
Door Latch for Kenmore Range Model # 79094032702
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
I have included instructions on the image below on how to remove your oven door. Once the door is removed, unscrew the frame that holds the latch into the door. If you are viewing this response on Sears PartsDirect and are unable to view the image, copy and paste the following web address to a seperate internet browser:
http://www.managemylife.com/mmh/questions/361885-error-code-79094032702-kenmore-electric-range
If you have further questions please let me know. Thanks for using SearsPartsDirect.com.

Read More
Lokelani -
Sears Technician
September 22, 2013

Top Parts