Model #79094001400 KENMORE Free Standing, Electric

  • Backguard Assembly
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

BROILER ELEMENT REPLACEMENT 79094001400 Kenmore Electric range

Q:

oven not heating up

A:

It is important when baking that the oven is properly heating because if not then your food will be rather unpleasant. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
April 24, 2012
A:

Thank you for your question and I understand your concern.

Based on your symptom and details, if the surface elements will heat normally; the electronic oven control is likely faulty. The L2 (line 2) out relay is not likely closing on the control board in order to provide the line 2 voltage to the bake and broil elements. I added an image below of the wiring diagram. _NOTE: If you feel confident in removing and replacing the oven control be sure to disconnect the range from the power supply before removing the panel from behind the console and replacing the oven control.

The electronic oven control #316557106 for Kenmore range model 790.94001400 can be ordered from Sears Parts Direct.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
April 25, 2012
A:

the broiler element is working just not the baking one, in other words it will broil but not bake.

Read More
Shawna -
April 26, 2012
A:

Shawna: Make a good visual inspection of the bake element for any signs of blisters or cracks. If the bake element looks normal, I suspect the bake relay has failed on the electronic oven control or it could have burnt wire connection on the bake element or at the oven control. Disconnect the power supply from the range and then remove the screws securing the bake element to the rear of the oven cavity and pull the bake element outwards to expose the connections. If the connections look okay, re-install the bake element. Remove the panel from behind the control panel and inspect the wire connections on the oven control. If there are no burnt wires, replace the oven control/clock. Check the things I have covered here and if I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
April 26, 2012
See more answers
Q:

the bake mode will not work

A:

A non working Oven is not something any of us want to see. If you are technically handy, this is a good site to get instruction and fix some things yourself. If you do not feel confident doing your own repairs, an option is to visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom link for some possibilities. Hope this is of help.

Read More
Priscilla V -
September 20, 2011
A:

Your symptoms indicate that the Bake button on that electronic clock control is bad. Replacing that clock control (part 316557106) should fix this problem. You can order that part from the Sears PartsDirect website. Be sure that you unplug the range before accessing internal components. Here is a link for a video that shows how to complete that repair: Rance Clock Control Replacement .

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
September 22, 2011
See more answers

Top Parts