Model #79092802010 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

while using the cook top, the burners turned themselves off and a minute later the lights on panel ent out. It is completly dead 79092802010 Kenmore Electric range

A:

Thank you for your inquiry on your Kenmore Range, Model: 790.92802010. From reviewing the details on your model, for the burners not turning on it could be caused by the contacts being stuck or welded together in the dual element surface unit switch. I recommend having the dual element switch replaced. As far as the panel not turning on I have provided a link to a couple of videos which should be able to troubleshoot what could be causing the board to not turn on.

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the range to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 23, 2015
Q:

Oven light switch on Kenmore Electric Range 790.92802010

A:

Good afternoon.... I can understand your curiosity over what this task might entail. Is this referring to the light that lets a person know that a burner is hot, or a light that illuminates so you can see better? Would you please respond to this thread with any additional information you might have? I will forward your question to an expert who will investigate the matter further and get back to you. You will hear from them within two business days if not sooner. Until you hear from us, have a nice day.

Read More
Henry -
February 14, 2013
A:

Problem solved! Rick, at first chat, suggested that I check the plunger rod-switch the oven door activates and doing so returned things to normal!! Far more pleasant that tecno circuits. Larry

Read More
larry430 -
February 15, 2013
A:

Thank you for your question and I understand your concern.

 The oven light relay contacts on the control board is likely stuck or welded shut. The electronic oven control part #316462807 will likely need to be replaced. The electronic oven control board is about $140.00 and you will also need to replace the overlay part #316352203 at the cost of $8.00.  

The oven control and overlay can be accessed and replaced from the rear of the range. You will need to disconnect the power cord from the power source and then remove the panel from behind the console. The control is fastened by a screw in each 4 corners. Remove one wire or connector at time from the old control and transfer it to the matching terminals on the new control. Be sure to apply the new overlay over the new control before installing the control board. 

 If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician.  Here is a link for the website:  Sears Home Services   .

 

Read More
Joey S -
Sears Technician
February 15, 2013
A:

Thanks, Joey. I'm printing your info to put in my oven book. Larry

Read More
larry430 -
February 15, 2013
See more answers
Q:

I have a stove - model number 79092802010 just 1 year old - disaster wtih self clean feature for first time

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
February 11, 2012
A:

You can clean the window and the inside of the oven cavity with a solution of detergent and warm water using a wash cloth. I recommend that you get as much of the spills and the residue off of the wall and the oven cavity bottom as possible. After that cleaning, I recommend that you wipe out the oven using warm water to rinse out any detergent residue. Then I recommend that you ventilate the house as much as possible and start another self clean cycle. You may be able to use the 2 hour cycle. You can vacate the house while that clean cycle is running if necessary. The fumes that you encountered during that first self-clean cycle should be less evident in this second cleaning routine. Once that cycle finishes, you should be able to continue to run those self-clean cycles on a regular basis to properly clean the range. It is not recommended to use oven cleaners such as Easy-Off in this type of self-cleaning oven. That self-clean cycle should burn off any spills and residue.

I hope that this information helps. If you need more assistance, let us know.

Read More
Lyle W -
Sears Technician
February 13, 2012
See more answers

Top Parts