Model #79092702010 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

f11 err 79092702010 Kenmore Electric range

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore range.

From the information you have provided above, the F-11 error codes implies there is an issue with the electronic control board keyboard. Disconnect electrical power, wait 30 seconds and restore power. If the fault code returns, replace the electronic oven control board. The keypad is incorporated into the electronic control board assembly on this type of circuit board.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
January 12, 2015
Q:

Range Gauge Wire

A:

I understand that the electrical requirements for your range are important. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day!

Read More
Yadira B -
August 29, 2012
A:

thanks Yadira

Read More
Hector -
August 29, 2012
A:

I looked up information on that range. It appears to have a KW rating of 12.5. It should use a 40 amp breaker with 8 ga. copper wire according to the technical specifications. I posted an image below that shows the KW rating and the breaker size recommendation. The copper wire size of 8 ga. is normally recommended for that breaker size and KW rating.

Local and National Electrical Codes should be followed when installing that range. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
August 29, 2012
See more answers
Q:

Temperature output Kenmore electric range

A:

I know how important it is to be carefull and make sure you do not damage your cookware to avoid also damaging your range and I will be happy to help. While you are waiting for an expert answer, I suggest you add to the thread of this question and include the full model number of your range so that the expert can provide you with a more detailed answer. I did manage to find a link that will provide you with some good information, I am also adding a second link in where you can enter your model number and your owners manual will pop up in where you can find some good information about your appliance. I hope my links are useful.

Read More
Joseph P. -
March 30, 2011
A:

The Model #79092702010

Read More
Reid -
March 30, 2011
A:

Thank you for your question.

I can understand not wanting to ruin your stainless steel cookware.

Most of the ranges have a limiter under the glass that will limit the underside of the glass to aproximatly 475 degrees. This of course is not the top of the glass temperature but the limiter should keep the temperature below 750 degrees on the power burner.

I will do some research on what the limits are for this model with the big tubo boil burner.

I will get back to you as soon as I hear from the manufacture.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
March 31, 2011
A:

Thanks Sam, that is exactly the answer I was looking for.

Read More
Reid -
March 31, 2011
See more answers

Top Parts