Model #79092412100 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

my oven

A:

I can understand your concern over your oven not heating properly. I did some research and provided a link to a similar question and answer on our site. I hope this will give your a better idea on the next step to take until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
September 14, 2012
A:

Thank you so much. That was very helpful. I think it is the same issue. The problem is that the schematic that the expert attached so that the questioner could check her connections was small and the more you zoom to be able to see it the blurrier it gets. I guess I'll just have to wait for the expert to respond and HOPE HE/SHE SENDS A BIGGER AND CLEARER PICTURE OF THE BOARD. PRETTY PLEASE!

Read More
Mindy -
September 14, 2012
A:

I recommend that you check the house circuit breakers for your range electrical outlet first. Although the range has power for the clock control, it may be missing the L2 leg of power through that electrical outlet.

I posted some images below that may help you with this problem. Hopefully you will be able to view them at full size. Our website appears to be having some problems with displaying the images at this time. Hopefully that will be corrected by the time that you receive this answer. The first image shows the wiring for the terminal block on the back of your range. I recommend that you unplug the range and check that wiring first. If you are not able to view that image properly, then you can view that same information in the installation guide for your range. Here is a direct link for the installation guide: Installation Instructions for Kenmore Range Model 790.92412100 . Page 5 shows the image that is provided below. I also provided additional wiring information for your range in the 2nd and 3rd images. You can use that information if you have to check the internal wiring (with the range still unplugged ).

If you find no wiring problems, then I recommend that you carefully check the voltage at that outlet using a volt/ohm meter as shown in this video: Video: Perform a Voltage Check on a 240 Volt Outlet . A problem with the voltage supply at that electrical outlet could be preventing your range from heating.

I hope that this information helps you fix that range problem. If you need more help, reply with additional details.

If you can't view those pictures, let me know.

If you get to the point where you need to have a service technician examine and repair the range, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
September 17, 2012
See more answers

Top Parts