Model #79092321301 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Broiler will not turn off 79092321301 Kenmore Electric range

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

i have a kenmore range model number 790.92321301

A:

A range is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
November 01, 2012
A:

Thanks for the inquiry about the range model 790.92321301. The cook top does not have a latch to release the top and lift. Any assess to under the glass top would be for servicing the burners. There are screws at front that hold the top in place and the rear has hinges that allow rotation when lifted. always disconnect power supply to appliance before servicing and be cautious of sharp metals on and around parts
I hope this helps answer your question, should you need additional assistance reply with more details.

Thanks Ron H.
If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Ron H -
Sears Technician
November 02, 2012
See more answers
Q:

my burners on the cooktop work but my oven does not get hot Could the problem be the probe in the back? SN#79092321301

A:

I'm sorry about the difficulties that you are experiencing with your oven. I did some research at managemylife.com and found an expert answer to a similar question that may assist you until your expert can respond. I have attached the link below. If you would like assistance from a qualified technician I have also attached a link to searshomeservices.com. I hope these links will help until your expert can respond.

Read More
James -
January 05, 2011
A:

I'm sorry you are having this problem. The information you have received is good but does not pertain to this model. It is possible the sensor (probe) could be the problem but if it's not heating at all, the most common problem will be a defective control or open element. If you have a meter and fill confident to check this, first disconnect power to the range. Now, remove the back console panel cover and you will see the control. Reconnect the power and now very carefully check the voltage from the bk terminal to L2 out. If there is no voltage or only 120 volts, the control # 316207511 will need to be replaced. If there is 220 volts, the element will probably need to be replaced. It�s possible there could be a broken wire on the element. Be very careful making this voltage check, it can be dangerous. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
January 07, 2011
See more answers

Top Parts