Model #79091413010 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

kenmore electric range - clicking sound

A:

I know that some sounds can be very confusing for the range. While you are waiting on your expert answer, I have found a link that will provide you the information you need. It will tell you what the clicking is. I hope this helps.

Read More
aashe -
August 29, 2011
A:

The clicking noise could be caused by a loose wiring connection on that terminal block on that back of your range. I recommend that you unplug the range and check the wiring connections on that terminal block as shown in the installation guide. Here is a link for your installation manual: Installation Instructions . If those connections are okay then you could have a voltage supply problem, a bad outlet cord or an internal wiring failure in the range. If you are certain that the voltage supply and the outlet cord are both okay, I recommend that you call Sears for warranty service at 1-800-469-4663 (1-800-4MY-HOME).

Read More
Lyle W -
Sears Technician
August 31, 2011
See more answers

Top Parts