Model #79091032401 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore Stove

A:

The oven switching to the broiler can be concerning. I did some research on your model number but was not able to find an answer to your question. Your expert will be able to help answer your question. It may take 24-48 hours. I do hope that everything works out.

Read More
Marc -
October 23, 2012
A:

Thank you for your question and I understand your concern.

You did not indicate if the bake (lower) element will ever get hot or not if you leave the oven on for a couple of minutes. It is not abnormal for the broil (upper) element to come on and alternate operation with the bake element. If the bake element is not heating and the element is good and there is not loose or burnt wire connection, the failure is most likely the electronic oven control/clock assembly. The electronic oven control #316455420 can be ordered from the Sears Parts Direct. You will also need the clock overlay #316220711 .

NOTE: Disconnect the power cord from the power source before servicing. The clock/oven control can be accessed and replaced from behind the control panel.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
October 25, 2012
See more answers

Top Parts