Model #79090831601 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Why won't the control panel work on my Kenmore range?

A:

The parts for this range are relatively inexpensive. The control board/clock for the range costs about $70. The element is about $30 and the switch that controls the element is about $15. Unless you have wiring that is damaged, these would likely be the parts that would need to be replaced. The labor would probably run about $150. The total repair may be as low as $250. To get an accurate estimate, you would need to have a service technician examine and diagnose the failures. I would use these estimates to determine whether you want to repair the range or replace it. If the range is fairly new and in good shape, it will probably make sense to repair it if the cost of the repair is less than half the price of a new range.

Read More
Lyle W -
Sears Technician

Top Parts