Model #79079383404 KENMORE ELITE Range, Electric/Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

oven flashes fault code

A:

Error codes on a range could be confusing. While your waiting for a detailed reply from an expert. I have provided the link below. Hope this is helpful.

Read More
Yadira B -
October 01, 2012
A:

Thank you for submitting your question, I do understand your concern in having a properly working oven in your home. The F-30 fault code indicates that the oven temperature probe is open. This fault code can also be caused by the electronic oven control (EOC). The best way to check it is to remove the back panel on the control area and check the resistance of the probe. This will require a ohms meter. Disconnect the electrical power before removing the back panel. The leads to the temperature probe connect to the back of the EOC and the wires are violet. The resistance of the temperature probe should be around 1100 ohms at 70 degrees. If the probe reads between 1000 and 1200 ohms the EOC is defective. If you are interested in having a Sears technician out to your, please go to: Sears Home Services . Thank you for choosing Manage My Life.com.

Read More
Maira -
Sears Technician
October 02, 2012
See more answers

Top Parts