Model #79078814405 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Gas range model 79078814405. Range and broiler worked oven did not. Then display went black

A:

When the display is blank on the Kenmore range, there is no way you will be able to use the oven. I an understand your concern and so do others who had the same issue with their range. I hope the information in the link is helpful.

Read More
Anna T -
October 21, 2012
A:

Thank you for your question and I understand your concern.

If the range is getting the proper voltage supply I suspect a failed electronic oven control/clock assembly.

The oven control/clock assembly #316418501 and the clock overlay #316419505 can be ordered from Sears Parts Direct. The clock/oven control can be replaced from the rear of the range. Disconnect the power cord from the power source and then remove the screws securing the panel behind the console and remove the panel. The clock/oven control is fastened with 4 screws. Transfer one wire at a time from the old clock to the new clock. Be sure to apply the new clock overlay over the new clock before installing.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
October 23, 2012
See more answers

Top Parts