Model #79078804501 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

need to change orifice from lp to nat.gas 79078804501 Kenmore Gas range

Q:

The ignitors on two of the burners on my Kenmore 790.7880 range light (spark) intermittantly. The other two burners and the oven work fine.

A:

I'm sorry to hear that you are having some difficulties with your Kenmore Range. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
James -
October 26, 2011
A:

Check for a spill on that burner heads and/or the ignitor electrodes. This could be preventing the electrodes from sparking properly on those affected burners. If you clean those components, be sure that you allow them to dry thoroughly before testing the electrodes. If they still won't spark properly after cleaning them, then the electrodes may need to be replaced. I recommend that you have a service technician replace those components. Here is a link for the Sears Service website: Sears Home Services .

If you want to complete this repair yourself and need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
October 27, 2011
See more answers

Top Parts