Model #79078739405 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Replacing electrode on left-rear burner

A:

Thank you for your question and I understand your concern.

There is a small little retainer ring on the bottom of the spark electrode that must be slid off before the electrode can be removed. You will have to remove the burner grates, burner cap and remove the screws around each burner before hinging the top up. I added an image below with the procedure of raising the top. NOTE: Disconnect the power cord from the power source before servicing. 

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
November 20, 2013
A:

Hi Joey, Thanks so much! This is just what I needed!!

Read More
kevin -
November 20, 2013
A:

Keven: You're welcome. Let me know if you need any further assistance. Have a great day!

Read More
Joey S -
Sears Technician
November 20, 2013
See more answers
Q:

How to recalibrate the oven temp settings on my Kenmore free standing range.

A:

The last thing you want is to have your baked goods being burned and I will be happy to help with this inconvenience. I was able to find two links that will provide you with some good information. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
February 25, 2012
A:

You can adjust the oven temperature up to 35 degrees as shown in the image below. That information is also on page 21 of your owner's manual. Here is a link for that manual in case you need it: Owner's Manual .

If that temperature difference is more drastic then you could have a problem with the oven temperature sensor probe or the clock control board. A broken element that is shorted to the metal in the cabinet of the range could also cause a severe overheating condition. Those links for previous answers that Joseph P. posted in the above response may help you with those types of failures. If you need parts, you can order them from the Sears PartsDirect website.

Be sure that you unplug the range before accessing internal components.

Reply with additional details if you need more help with this failure.

If you get to the point where you need to have a service technician examine the range and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 27, 2012
See more answers

Top Parts