Model #79078583407 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Broiler igniter stays on 790.78583407

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your range and I do understand your frustration. Glad to help out. I'm looking at your model number 79078583407 and this type of failure is normally caused by a failed electronic control board in the console. The control board controls the igniter’s functions and if it is staying all the time indicates the electronic timer control. I recommend having a service technician diagnose the problem. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
December 04, 2014
A:

I replaced the control board and it did not make any difference. What would be the next step?

Read More
PeteZ -
December 07, 2014
See more answers
Q:

Broiler igniter stays on. 790-78583407

A:

Can an expert suggest a starting point?

Read More
PeteZ -
December 03, 2014
A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your range and I do understand your frustration. Glad to help out. I'm looking at your model number 79078583407 and this type of failure is normally caused by a failed electronic control board in the console. The control board controls the igniter’s functions and if it is staying all the time indicates the electronic timer control. I recommend having a service technician diagnose the problem. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
December 04, 2014
See more answers
Q:

How do I keep enamel on my stove top grates from coming off?

A:

I assume that you are referring to the cleaning instructions from the owner's manual that are shown below in your details. Following these cleaning instructions will help keep the enamel on the stove top grates from coming off or chipping. If you wash the grates in the dishwasher, do not allow them to bang against other items (or each other). Rinse and dry the grates thoroughly after cleaning them before you use the cook top and heat up the grates. Use pots and cookware with smooth bottoms and do not allow cast iron cookware to scrape across the grates when cooking. These tips should help you maintain the enamel finish on the grates.

Read More
Lyle W -
Sears Technician
December 05, 2009
A:

Can I clean my cast Iron burners in my self cleaning oven

Read More
Judy -
February 26, 2011
A:

How can I clean my cast iron burners

Read More
Nelida -
November 10, 2013
See more answers

Top Parts