Model #79078531608 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

oven not working properly 79078531608 Kenmore Gas range

A:
Natasha12 -
Sears Technician
August 12, 2015
Q:

oven not working properly 79078531608 Kenmore Gas range

A:

Thank you for your inquiry on your Kenmore Range, Model: 790.78531608. From reviewing the details on your model, from what you’re describing it sounds like it could be the temperature/ sensor probe that has gone bad. The temperature/sensor probe sends messages to the control board advising it how hot the oven is getting once the probe hits a certain heat level it advises the control board to stop heating the oven.I have provided a link below for the probe.

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the Range to prevent the risk of injury or any electrical shock

 

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry93 -
Sears Technician
February 27, 2015
A:

still waiting for an answer

Read More
Larry -
February 28, 2015
A:

oven not reaching temperature flames at oven burner very small appears to be other than temp/sensor probe like it`s restricted not getting gas

Read More
Larry -
February 28, 2015
See more answers
Q:

gas stove 790 785 31608 converting from gas to propane

A:

Converting your appliance can be a challenge without any instructions. While you are waiting on an expert to answer your question, I found some great links in the Manage My Life website. I also found your owners manual in the Manage My Life website. I have attached the links below. Have a nice day!

Read More
Dezeray S -
April 18, 2012
A:

Thank you for your question and I understand your concern.

Converting the range to LP gas will require a conversion kit and converting the pressure regulator to LP setting. The conversion kit and instructions is usually supplied with the range. The conversion kit is usually found on the back side of the range (some models). I added an image below with the LP conversion instructions.

All of the surface burner orifices will have to be replaced with LP orifices and the oven burner spuds will need to be turned clockwise until the bottom out. The LP conversion kit is part #316243700 if you need to order it. You can order the LP conversion kit 316243700 for Kenmore range model 790.78531608 at Sears Parts Direct.

Read More
Joey S -
Sears Technician
April 18, 2012
See more answers

Top Parts