Model #79078521400 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

range from propane back to Natural Gas, model 79078521400

A:

When making some major adjustments on an appliance, the instructions always come in handy. While you are waiting for an expert to respond I was able to locate some great information that could possibly assist you with your issue. I have added the link below. Hope this helps!

Read More
Yadira B -
February 19, 2013
A:

Thank you for your question and I understand your concern.

 I added three images below to follow. Reverse the procedure to convert your range back to Natural gas. I ran out of places to add the 4th image so I will add it to a second response.

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
February 20, 2013
A:

Matt: Below is the 4th image of the conversion instructions. Remember to reverse the procedures to convert it back to natural gas.

Read More
Joey S -
Sears Technician
February 20, 2013
A:

These images can not be viewed. I tried printing and zooming, they are just to small. I did some research and this is what I think the procedure is, can you please verify and add any missing details? (1) replace the four orfices on the burners (2) adjust the "spuds" on the broiler and the oven. broiler flame is not to exceed the heat shield and oven flame should not be larger than one inch. (3) adjust regulator from LP to NG setting (sounds like it may be a matter of flipping a valve??) better images of the directions would help, or just give me the details in the forum please. thanks.

Read More
Matt -
February 20, 2013
A:

Matt: I do not know why your images are not opening larger for you. On the pressure regulator is a cap to remove. The hollow end should be threaded towards the valve for Natural gas. Remove and replace the 4 surface orifices. The oven burner spuds will need to be opened/turned about 2-3 revolutions counter clockwise for natural gas.

Read More
Joey S -
Sears Technician
February 20, 2013
See more answers

Top Parts