Model #79078503010 KENMORE ELITE Range, Electric/Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Follow up on oven heating 79078503010 Kenmore Elite Gas range

A:

Thank you for your inquiry on your Kenmore Washer, Model: 790.78503010From reviewing the details on your model, I have provided a link to a couple of videos which trouble shoot what could cause the oven to stop heating up. The link is found below.

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the range to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry93 -
Sears Technician
April 02, 2015
Q:

Oven not heating 79078503010 Kenmore Elite Gas range

A:

 Thank you for your inquiry on your Kenmore Washer, Model: 790.78503010. From reviewing the details on your model, I have provided a link to a couple of videos which trouble shoot what could cause the oven to stop heating up. The link is found below.

 

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the range to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry93 -
Sears Technician
April 02, 2015
Q:

Are the placement of LP conversion for Kenmore Elite Dual Fuel Range correct?

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Jackie S -
January 09, 2012
A:

Looking at at the way the question is printed above, the information I typed is not all there, so will try again. The complete information for which I am trying to get confirmation is: back left burner LP1.09 replaces NG187; front left burner LP.84 replaces NG146; center burner LP.84 replaces NG146; back right burner LP.66 replaces NG107; front right burner LP.93, LP.22, LP.93 replace NG167, NG048,NG167. Thank you.

Read More
Anonymous -
January 10, 2012
A:

I am showing that you should have LP conversion kit 316542417 for this range. I provided the instructions that I have for that kit in the images below. You will not need that last page since your range has an electric oven. Based on the information in that document, I am showing this configuration for the burner orifices:

  • Right Front -- 2 of the 8K Purple orifices for the twin burners (.84mm) and the 750 BTU Orange orifice (.22mm) in the middle as the simmer orifice
  • Right Rear -- 5K Pink orifice .66mm
  • Center -- 9.5K White orifice .93mm
  • Left Front -- 9.5K White orifice .93mm
  • Left Rear -- 14K Brown orifice 1.09mm

This information should help the installer replace those orifices on the range.

NOTE: This conversion should be completed by a qualified installer. Contact your local gas supplier if you need a qualified installer to complete this conversion. You may also be able to find a pre-screened service provider on the ServiceLive.com website.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
January 11, 2012
A:

Here is the 4th page even though it will not be needed for this dual fuel model.

Read More
Lyle W -
Sears Technician
January 11, 2012
A:

Thank you very much, Lyle.

Read More
Anonymous -
January 12, 2012
A:

We are always glad to help.

Read More
Lyle W -
Sears Technician
January 12, 2012
A:

Instructions for conversion to LP on Proline dual fuel free standing range indicate change of orientation of insert under hex cap in regulator in addition to jet changes. My regulator configuration doesn't match drawings in installation manual. Hex cap contains plastic insert with tall cylindrical projection that fits inside of regulator coil spring, but with no provision to remove or reposition. Common sense tells me that the regulated pressure must be changed to accommodate the LP versus natural gas setting. Image attached. Please advise.

Read More
Michael -
January 20, 2012
A:

The red insert needs to be flipped over as shown in the image below for LP (Propane) gas. I apologize that the instructions for that type of regulator were not included in that LP conversion kit instruction sheet. I have forwarded that information to the manufacturer so that it can be corrected. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
January 21, 2012
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show