Model #79077559804 KENMORE ELITE Slide-In Range, Electric/Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

F95 Error for Kenmore Elite Oven

A:

It can be very frustrating when your oven begins to malfunction and give display error codes. i did some research and provided a link to a similar question and answer on our site. I hope this will shed a little more light on the issue until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
October 19, 2012
A:

Thank you for submitting your question. Julio has provided good information for the F95 error code. Press the "STOP" key and turn power off for 5-10 minutes then turn the power on. If the door motor never stops rotating, or if the F95 error comes back again, verify the wiring of the motor. If the wiring is good, replace the main control board (316577072). If the problem persists, replace the motor door latch assembly (316464300). You can order all parts from our Sears Parts Direct web site. Remember to disconnect the power to the oven before servicing the unit. I hope this information helps. Please reply back to this thread if you require further assistance with this repair. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
October 20, 2012
A:

Can I get either the repair manual or some type of schematic so that I can figure out where the door motor is and how to test it?

Read More
Jud -
November 19, 2012
See more answers

Top Parts