Model #79077552800 KENMORE ELITE Slide-In Range, Electric/Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

How to fix F11 Error on Kenore Elite Oven?

A:

Reprogramming likely refers to rebooting the range by unplugging it for 3 minutes and then plugging it back in. You can try this procedure. After plugging the range back in, you may be able to program the time on the display. If it works properly then your situation will be resolved. A glitch or power surge through the electrical lines can sometimes "confuse" the control board on the range. Rebooting it in this manner will sometimes reset the control so that it works properly.

If this troubleshooting tactic does not work, I recommend that you unplug the range and remove the back panel. Check the wiring connections circled in the second image below. It requires some significant dis-assembly of the console to access these connections to carefully check them. The first image shows some pictures of that process. After you remove the back panel, you will need to pull the plastic cap off of the console. You will probably need to remove the metal brace between the end caps. You will then need to remove the screws that secure the touchpad assembly to the console. There are 2 screws on each side that secure it to the end caps of the console. There are 3 screws across the base of the touchpad. There are also screws in the power control board on the left side that must be removed so that you can fold the glass touchpad forward to check the connections. If the connections are secure, you will probably need to replace the control panel. You can order this part from the Sears PartsDirect website. Use the full model number of your range to access the parts diagram and order the correct part. The part number for the range with full model number 790.77552800 is 5303935294. The part number for your control panel may be the same depending on your full model number.

If you replace the control panel and still have problems, you will need to replace the electronic control board (part 316577072 for model 790.77552800).

These tips may help you repair this problem yourself. If you need more assistance, reply with additional details.

This is a fairly advanced repair. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 26, 2010
Q:

Ask your own question or join this conversation

A:

Reprogramming likely refers to rebooting the range by unplugging it for 3 minutes and then plugging it back in. You can try this procedure. After plugging the range back in, you may be able to program the time on the display. If it works properly then your situation will be resolved. A glitch or power surge through the electrical lines can sometimes "confuse" the control board on the range. Rebooting it in this manner will sometimes reset the control so that it works properly.

If this troubleshooting tactic does not work, I recommend that you unplug the range and remove the back panel. Check the wiring connections circled in the second image below. It requires some significant dis-assembly of the console to access these connections to carefully check them. The first image shows some pictures of that process. After you remove the back panel, you will need to pull the plastic cap off of the console. You will probably need to remove the metal brace between the end caps. You will then need to remove the screws that secure the touchpad assembly to the console. There are 2 screws on each side that secure it to the end caps of the console. There are 3 screws across the base of the touchpad. There are also screws in the power control board on the left side that must be removed so that you can fold the glass touchpad forward to check the connections. If the connections are secure, you will probably need to replace the control panel. You can order this part from the Sears PartsDirect website. Use the full model number of your range to access the parts diagram and order the correct part. The part number for the range with full model number 790.77552800 is 5303935294. The part number for your control panel may be the same depending on your full model number.

If you replace the control panel and still have problems, you will need to replace the electronic control board (part 316577072 for model 790.77552800).

These tips may help you repair this problem yourself. If you need more assistance, reply with additional details.

This is a fairly advanced repair. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 26, 2010
Q:

need part number for missing foot pad for stovetop optional griddle that is used for dual fuel range model 790.77552800

A:

Whenever I'm in need of a part for my Range, I find it real easy by visiting Sears Parts Direct website. You can search Parts Direct website and purchase the part number you found online. I attached the link below, I hope this helps!!!!!!!!

Read More
Raquel F -
September 21, 2010
A:

I am not able to find a specific part number for a missing foot pad on the optional griddle for that model of range. That component does not appear to be available. There is burner grate pad replacement kit that is available from the Sears PartsDirect website. The part number for that kit is 316267400. A photograph of this kit is shown in the image below. If the griddle foot pad that is missing matches the ones shown in the image below, then you may be able to use this kit to repair the griddle. I am not able to view an image of the griddle and I do not have a display to refer to in order to determine whether the kit below will work. If this is not the type of pad that you need, then you may be able to find a suitable replacement for the part at your local hardware store.

I hope that this information helps. If you need more assistance, reply with additional details (and a digital picture of the foot pad that is missing if possible).

Read More
Lyle W -
Sears Technician
September 22, 2010
A:

Thanks Lyle, you are a lot smarter than the Sears folks who could not find anything. The grill is an optional accessory that has the number 3164608 embossed on the bottom. It is probably a GE part. The pads are very similar to the ones you found except the stems are are smaller than the grate stems. The actual measurement is overall height 7 mm, stem thckness 4mm, stem length 6 mm, 9 mm head diameter, head thickness 3 mm. Wish I could give you the measurements in inches but my caliper battery is dead. These are supposed to be glued in with a high heat reistant adhesive but don't show evidence of any glue residue. I am sending you an image. Good luck, Tom

Read More
rustydog12 -
September 22, 2010
A:

Thanks for the image. The part number could be a GE part but it looks more like a Frigidaire (Electrolux) part number. These companies share sources sometimes so you could be correct. The grate foot accessory shown in the above response may fix your problem. I also provided an image of a RepairClinic.com part in the image below. Both of these grate foot replacement kits have adhesive included. It is likely that this will fix your problem. I don't have a source for a single grate foot or any part that is more specific to that griddle. Let me know if I can help you further.

Read More
Lyle W -
Sears Technician
September 23, 2010
See more answers

Top Parts