Model #79077519806 KENMORE ELITE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

erro codes 79077519806 Kenmore Elite Gas range

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the F11 error code after replacing the control board. I know how frustrating that is to have happen.

The F11 error code indicates a 'Shorted Keypad or Selector Switch'. You should have replaced the keypad or overlay along with the electronic control board. If so, disconnect power and check the electrical ribbon harness from the keypad to the board. Make sure it's secure on the connector connection. 

If you didn't replace the overlay, I would recommend replacing it. Presuming all went well with the new board installation, and there wasn't any new board damage from electrostatic discharge, this sounds like an overlay or connection issue. 

Once power is restored and the connection has been verified, if the error remains, one of the parts is defective or damaged, and either the board or the overlay will need replacement.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.

Read More
Jeff Wallace Sr -
Sears Technician
November 23, 2014
Q:

error code 79077519806

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the F11 error code after replacing the control board. I know how frustrating that is to have happen.

The F11 error code indicates a 'Shorted Keypad or Selector Switch'. You should have replaced the keypad or overlay along with the electronic control board. If so, disconnect power and check the electrical ribbon harness from the keypad to the board. Make sure it's secure on the connector connection. 

If you didn't replace the overlay, I would recommend replacing it. Presuming all went well with the new board installation, and there wasn't any new board damage from electrostatic discharge, this sounds like an overlay or connection issue. 

Once power is restored and the connection has been verified, if the error remains, one of the parts is defective or damaged, and either the board or the overlay will need replacement.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
November 23, 2014
Q:

Kenmore Elite Slide in Gas Range top removal

A:

Thank you for contacting ManageMyLife.com regarding removing the range top on your Kenmore gas range. I understand your need for this information and I am happy to help you today.

The images below will assist you with raising the cook top on your range. Also, if you pull the range away from the wall and remove the screws holding the covers to the back of the range and remove the covers, you should be able to check for any other debris the mouse may have left. Before attempting to disassemble the unit, please be sure to disconnect all power to the range.

If you do not feel comfortable disassembling the range yourself, service can be scheduled at the following link: Sears Home Service.

I really hope this information helps you today. Thank you for using ManageMyLife.com.

Read More
Korinna S -
Sears Technician
September 18, 2013

Top Parts