Model #79077463800 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I disconnect my kenmore gas stove ? Model number 79077463800 temporarily for a few hours for backsplash installation. I have never done this before.

A:

Managemylife.com is always a great resource to find the answers to just about anything. I know this information can be very helpful for you to have. While you have been waiting for your expert to respond, I did some research but I was unable to locate information that would be helpful with regards to your question at this time. Your expert will be answering you within two business days but usually sooner. In the meantime I have entered an installation guide which may be helpful.

Read More
Anna T -
December 18, 2012
A:

I see that Anna T. posted a link for the installation guide on that range in the above response. That manual should help you safely pull the stove out and disconnect it for that project. You can reverse the steps in that installation manual to pull the range out of the cabinet and shut off the gas supply. If you need to disconnect the gas line, that manual should help you with that procedure as well. Make sure that the gas line is properly sealed and leak checked when the range is installed back into the cabinet. If you need more help, reply with additional details.

Read More
Lyle W -
Sears Technician
December 19, 2012
See more answers
Q:

Why are the flames too high for the oven on my Kenmore gas range?

A:

It sounds like the regulator was not set properly for LP gas or the orifice spud needs adjusted for LP gas. I recommend calling for service on something like this. I have also included some helpful troubleshooting tips for you in the image provided below.

Read More
biker dave -
Sears Technician
December 14, 2009

Top Parts