Model #79077462800 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

What is the BTU rating of my gas stove 79077462800 Kenmore Gas range

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the BTU's for your range. I did look into the model number you have provided, and I have found information to assist you.

Front right- 17k
Righ rear- 5k
Left rear- 12k
Left front- 9.5k
Center- 9.5k

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
July 30, 2014
Q:

Kenmore burners won't light

A:

If all four of the top burners will not light and there is no spark then most likely the 318079001 spark module is likely the problem.  It is not likely that all 4 top burner switches would fail at the same time.   Replacing the spark module can be a do-it-yourself project if you are comfortable with such projects.  You can also have the problem repaired in your home by a technician.  Here is the link: Sears Home Services.  I hope this helps.  You can reply below with any additionald details for further assistance. 

Read More
Fred M -
Sears Technician
October 15, 2013
A:

If all four of the top burners will not light and there is no spark then most likely the 318079001 spark module is likely the problem.  It is not likely that all 4 top burner switches would fail at the same time.   Replacing the spark module can be a do-it-yourself project if you are comfortable with such projects.  You can also have the problem repaired in your home by a technician.  Here is the link: Sears Home Services.  I hope this helps.  You can reply below with any additionald details for further assistance. 

Read More
Fred M -
Sears Technician
October 15, 2013
See more answers
Q:

my kenmore 790 gas range oven panel is not working. how do i fix it?

A:

I can understand your issue that your having with the Oven. I placed a link where an expert provides some general information. It should be able to pin point the issue that our having with the oven.

Read More
celene -
January 13, 2011
A:

I am assuming the top burner electrodes are sparking and lighting the burners. This tells us the range is getting voltage.

I would disconnect the power to the range and remove the rear cover on the control panel. The clock has 11 wires that connect to the back of it. The black and white wires supply 120 volts ac to the clock and oven. I suspect either the black or the white wire is disconnected from the clock.

I recommend you check these wiring connections with the power cord disconnected. If you don't find a problem here, I recommend you go to http://services.sears.com/shs/category/repair?sid=MMLxexpertxmerch and get a Sears technician to repair the range.

If you have more questions reply on this thread and we will be glad to help.

Read More
Jimmy K -
Sears Technician
January 14, 2011
See more answers

Top Parts