Model #79077442800 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

F30 code error 79077442800 Kenmore Gas range

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

The F10 and F30 codes indicate that you have a problem with the oven temperature sensor probe. It is likely that this component needs to be replaced. There is a slight chance that a wiring problem or the electronic oven control board could be causing this problem. Since you already replaced the oven probe then you would need to check the wiring and the control board.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
Samantha A -
Sears Technician
November 21, 2014
A:

Can you help me more? I don't know what wiring may need checking. What is the control panel? Where to temperature is set and displayed? Thanks.

Read More
Darlene -
November 21, 2014
See more answers
Q:

Oven Temperature fluctuates and doesn't heat properly 79077442800 Kenmore Gas range

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your oven and I do understand your frustration. Glad to help out. I'm looking at your model number 79077442800 and from your description I suspect that the oven temperature probe may be failing. Here is a link that will help test the probe and verify if it is functioning correctly. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
November 14, 2014
Q:

Wattage requirement for Kenmore gas range model 79077442800

A:

Good afternoon..... I can fully understand your interest in this topic. I did locate a link that will discuss this situation in greater detail. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to the wattage that's used and have a nice day

Read More
Henry -
January 14, 2013
A:

I can understand how important it is to have the right information for your range. This gas range should have a maximum wattage draw of about 450 watts which should be about 3.7 amps. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
January 15, 2013
See more answers

Top Parts