Model #79075718893 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I order a kit to convet stove from natural gas to propane? 79075718893 Kenmore Gas range

A:

Thank you for contacting SearsPartsDirect.com with your question about your Kenmore Gas Range. I will be happy to help you with the kit to convert it from natural gas to propane. 

SAFETY WARNING: Gas conversions should always be completed by a qualified technician to avoid dangerous gas leaks. If the conversion is not completed properly, a gas leak can result in property damage, serious injury or death.

I have included the link for you to order the conversion kit.

LP Gas Conversion Kit for Kenmore Range 79075718893.

I hope this answers your question. If you need further assistance, please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
February 14, 2014
Q:

Kenmore range burner liting

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I would suggest that you provide a little more information such as the make and complete model number of your product so your expert will be able to provide you the best possible answer. Just click on reply below where you can provide the additional information.

Read More
aashe -
November 14, 2011
A:

the model no. is 790.75718893 one of the burners will lite but the other 3 will not when you turn the knob to lite. they all will click for a short time but will not lite.

Read More
Dave -
November 14, 2011
A:

I recommend that you thoroughly clean those burners as shown in the image below. That page is from your owner's manual. Here is a link for the full owner's manual on that range: Owner's Manual . Let the burners dryer thoroughly and then see if they ignite. If the burners still won't ignite, check to see if you see a spark coming from the electrode. If not, then you will probably need to have a service technician repair the range. Here is a link for the Sears Service website: Sears Home Services .

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
November 16, 2011
A:

thanks, i started cleaning and checked the spark again and it only will spark on one burner when each knob is moved to lite. any ideas for me to try?

Read More
Dave -
November 16, 2011
A:

Since the igniter electrodes are not sparking on 3 of the burners, you either have a bad spark module (part 5303289034) or you have 3 bad electrodes on those burners. A wiring failure could also cause this failure. I assume that you already cleaned those burners and electrodes and let them dry. If you want to fix this problem yourself, you could try to replace that spark module but that is a fairly expensive part (around $80). I still recommend that you have a service technician examine the range and correct this problem.

Read More
Lyle W -
Sears Technician
November 16, 2011
See more answers
Q:

Why is my Kenmore oven taking 1 & ½ hours to heat up?

A:

For the oven taking too long to preheat I suspect the bake igniter, temp sensor or safety valve. I recommend checking the temp sensor & bake igniter first. You will need a meter to test these components. If the bake igniter does not come on during preheat & is receiving 120volts we know that the bake igniter is faulty. For the top burners not lighting I suspect the burner is clogged or the igniter is faulty.

Other possibilities, top burners; spark module or wiring harness. oven; oven control board, regulator or wiring harness.

Please see the image provided below for information on testing the temp sensor.

Read More
biker dave -
Sears Technician
November 29, 2009

Top Parts