Model #79075718891 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

oven burner not liteing

A:

I know that it can be very frustrating to have your appliances stop working correctly. While you are waiting for your expert answer, I have found a link that will provide some information on the issue. It sounds like there could also be a problem with the temperature probe. This can also stop the oven from lighting. I hope this helps.

Read More
aashe -
September 22, 2011
A:

Since the broiler burner works, your likely failure is the igniter (part 5303935066). The theory of operation for that burner assembly is shown in the image below. If the relay on the clock control board is closing properly to send voltage to that bake ignition circuit, then the igniter should be glowing when you set the oven in the bake mode. If that igniter is glowing, then it is probably not heating enough so that the resistance decreases to the point where the safety gas valve will open. If that igniter is not glowing, it could be bad. You could also have a failed relay on the clock control board. These tips may help you fix this oven problem yourself.

If you need parts, you can order them from the Sears PartsDirect website.

If you need more help, diagnosing this failure, reply with additional details (whether igniter is glowing in the bake mode) and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
September 26, 2011
A:

the igniter was the problem, not fun to replace but works fine now, thanks for your help

Read More
Rod -
September 26, 2011
A:

Thanks for letting us know how this turned out. I am glad to hear that the oven is working. Let us know if you ever need more help.

Read More
Lyle W -
Sears Technician
September 27, 2011
See more answers

Top Parts