Model #79075661101 KENMORE Free Standing, Gas

  • Door
    3 Results
  • Burner
    3 Results
  • Backguard
    3 Results
  • Top/drawer
    3 Results
  • Body
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Burner Cap 79075661101 Kenmore Gas range

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

The front right (largest) burner cap for this model is offered in three different colors, and color was not mentioned in the request, so I am not entirely sure which one is needed. However, for black, the part number is 316213700. For Grey, the part number is 316213701. For Brown, the part number is 316213703.

For convenience, I have included a blue link below that you may click on to be directed to the PartsDirect page to input any of the part numbers supplied above to purchase the correct color of burner cap that is needed.

SearsPartsDirect.com to Input Part Number for Front Right Burner Cap

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
November 14, 2013
Q:

Burner cap 79075661101 Kenmore Gas range

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

The front right (largest) burner cap for this model is offered in three different colors, and color was not mentioned in the request, so I am not entirely sure which one is needed. However, for black, the part number is 316213700. For Grey, the part number is 316213701. For Brown, the part number is 316213703.

For convenience, I have included a blue link below that you may click on to be directed to the PartsDirect page to input any of the part numbers supplied above to purchase the correct color of burner cap that is needed.

SearsPartsDirect.com to Input Part Number for Front Right Burner Cap

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
November 14, 2013
Q:

kenmore model 790-75661101 gas stove doesn't stay lit.

A:

I understand that your Kenmore gas stove does not stay lit, which can definitely be frustration. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
January 04, 2013
A:

Thank you for your question and I understand your concern.

The top will hinge open a little but you will have to remove the grates and burner caps and take out every little screw securing the burners to the top. There are some screws located under the front of the top that will need to come out too. Those little screws can break easily if you do not use caution when removing them. I would spray some penetrating fluid on each screw and let is soak awhile. Then, break the screw loose and then tighten it again, continue doing this until you think it will thread out without breaking.

I would attempt to remove just the surface burner orifice first and just make sure you do not drop it under the top. If you do, use caution when hinging the top up a little or just order another orifice for that specific burner. It will not likely open very far without it interfering with the control panel.

If you decide to replace the orifice or you drop it under the top, you can order one a Sears PartsDirect .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
January 05, 2013
See more answers

Top Parts