Model #79075657002 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore stove clock display issue

A:

From my understanding you should have an answer provided from an expert within 24 to 48 hours. Have a nice day.

Read More
Alina F. -
January 20, 2011
A:

It is likely that the display is turned off. Press and hold the CLOCK icon for 5 deliberate seconds (or a little longer). The display should then return and stay on properly.

If you still have problems, reply with the full model number of your range and we will assist you further. The model number is often on the base of the range in front of the right front leveling leg. Pull the bottom drawer out to view this area. The model number is sometimes located around the opening to the oven cavity. Open the oven door to view this area.

Read More
Lyle W -
Sears Technician
January 20, 2011
A:

Ok thanks I will try to find the full model #. The press & hold the CLOCK icon for 5 seconds didn't work.

Read More
eduberow -
January 20, 2011
A:

Some ranges use a different button to turn on/off the display. You can try the TIMER - OFF button or various other buttons. You may have to hold the button for 15 seconds on some models. You could also be in a Sabbath mode that would shut off the display and may affect oven operations. Once you reply with the model number, we should be able to provide more specific advice.

Read More
Lyle W -
Sears Technician
January 21, 2011
A:

Okay, here is the M#: 79075657002 & S# VF0404869

Read More
eduberow -
January 31, 2011
A:

I thoroughly checked the owner's manual. I do not find a feature on this control that will turn off the display. It is likely that the control board is damaged and will need to be replaced. I recommend that you have a service technician examine the range. I provided a link for the Sears Service website below.

Read More
Lyle W -
Sears Technician
January 31, 2011
See more answers

Top Parts