Model #79074403990 KENMORE Slide-In Range, Electric/Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top
    3 Results
  • Drawer/door
    3 Results
  • Door
    3 Results
  • Wiring
    3 Results
Find part by diagram >

Question and Answers

Q:

I need to know how many BTU my kenmore model # 79074403990 gas range uses .

A:

Knowing how many BTU's the range uses can be helpful. I did some research on your model number but was not able to find information about the BTU's. Your expert will be able to help answer your question. It may take 24-48 hours. I do hope that everything works out with the range.

Read More
Marc -
December 05, 2012
A:

Here are the BTU ratings for the burners on that range:

  • Right Rear and Left Rear -- 4K BTU
  • Right Front and Rear Center -- 8K BTU
  • Left Front -- 11K BTU


I hope that this is the information that you are looking for. If you need more assistance, let us know.

Read More
Lyle W -
Sears Technician
December 07, 2012
See more answers
Q:

model number 790-744-03990 range oven temp light is very dim

A:

Below I have attached a couple links that may help you with the dim light on your range. I hope these links are helpful!

Read More
Jackie S -
March 17, 2011
A:

If there is a function that controls the brightness of the display, it will be in the Timer Instruction Guide for that model of range. I do not have a copy of that guide. If you have your copy of that document, you can try to find the procedure in that guide.

I have contacted the manufacture to obtain an electronic copy of that guide. If I receive that document from the manufacturer, I will update this answer when I receive that document.

If there is not a procedure for changing the brightness of the display, then you will probably need to have the control board repaired. The control board is no longer available as a replacement part but you could unplug the range and remove it. It can be sent to Core Centric Solutions for repair. The cost of the repair would be around $150. Once the control board is returned to you, then you could re-install it in the range. Here is a link for the Core Centric Solutions company in case you need it: Core Centric Solutions.com .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 18, 2011
A:

I received the Timer Instruction Guide from the manufacturer but it did not show a method for increasing or decreasing the intensity of the temperature/time display on the control. The control board will probably need to be repaired as noted above to fix this type of problem.

Read More
Lyle W -
Sears Technician
March 18, 2011
See more answers

Top Parts