Model #7907432190 KENMORE Free Standing, Gas

  • Backguard Section
    3 Results
  • Cooktop Section
    3 Results
  • Oven Door
    3 Results
  • Broiler Section
    3 Results
  • Body Section
    3 Results
  • Oven Burner And Top Burners Section
    3 Results
Find part by diagram >

Question and Answers

Q:

What would keep my gas oven from heating up to temp? 7907432190 Kenmore Gas range

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your oven is not keeping temperature. 

Oven Calibration
Set the electronic oven control for normal baking at 350°F. Obtain an average oven temperature after a minimum of 5 cycles. Press STOP or 
CLEAR keypad to end Bake mode. 
Temperature Adjustment
1. While in a non-cooking mode, press and hold the BAKE key pad for 6 seconds.
2. The current calibration offset (temperature adjustment) should appear in the temperature display.
3. Use the number key pads (0-9) to enter the desired amount of adjustment (up to 35°F).
4. Press the CLEAN key pad to change the sign of the adjustment to a (-) if necessary. A positive adjustment will not display a sign.
5. Once the desired adjustment (-35° to 35° F) has been entered, press the START key pad to accept the change or the STOP or CLEAR key 
pad to reject the change.
Note: Changing calibration affects all Baking modes. The adjustments made will not change the self-cleaning temperature.

You will also want to check the Oven Sensor to see if it is working correctly.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the unit before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
August 20, 2015
A:
Natasha12 -
Sears Technician
August 20, 2015
A:

I don't think most of your suggestion will help since this is an OLD SCHOOL, ie NON DIGITAL, STOVE. I did end up replacing the ignitor because last time I had this problem that cured it. Now, it still doesn't work and neither the NEW ignitor or the old ignitor will glow. Is it possible that there is some kind of fuse or something that needs reset or something? Also, how do I check the oven sensor.

Read More
kjkestner -
August 26, 2015
See more answers
Q:

how to adjust the orifice on a kenmore gas cook stove model #790.7432190

A:

Thank you for choosing Sears Parts Direct. For safety precautions we are unable to provide that information. I recommend calling a licensed gas technician.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
December 15, 2014
A:

I dont understand that its a safety precaution on how to adjust the orifice on that cook stove. I cannot afford to have a licensed gas technician come to replace the orifice or adjust it. This is the first time I have ever heard that people have changed and or adjusted orifice on appliances for years. The stove was set up for propane and we are hooking it up to natural gas and we need to change the orifice or adjust so it works properly

Read More
Carolyn -
December 16, 2014
See more answers
Q:

Kenmore Cook stove orifice 790.7432190

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about you Kenmore stove model 790.7432190. I am so sorry you are having trouble locating the orifices on your stove. I will be happy to help you with this. In this case the orifices are not separate parts. They are built into the burner assemblies. If you need to replace an orifice, you would need to replace the burner. 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
December 16, 2014

Top Parts