Model #79072903010 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

stove door srung and won't close tightly 79072903010 Kenmore Gas range

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore range.

From the information you have provided above, after researching the issue. the door hinge will have to be replaced. the part number for both hinges are 316575906. I have linked some information for you that might help you replace the hinges.  Click here for information.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
February 19, 2015
Q:

My oven locks off when the stove is plugged in and it makes a noise, I never baked, stove purchased Oct 2011. 79072903010 Kenmore Gas range

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with dishwasher.  Upon researching model  79072903010; based on the description provided it sounds like you may need to replace the control board. The oven is controlled by the control board so when the control board fails then the oven features such as the lock can fail. I have posted a link below of the control board key#20.

I trust this information will help you, Thank you for choosing Sears.

Read More
Jeff Wallace Jr -
Sears Technician
November 25, 2014
Q:

how do i change my oven from natural gas to lp

A:

You need to turn down the orifice hood for the broil & bake burners & convert the regulator if you haven’t already. I believe the orifice hood takes a ½ inch opened end wrench. Please see the instructions below.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
May 18, 2010
A:

i need the skematics for the conversion from natural gas to propane on my new sears stove #79072903010 please email it to me thanks,

Read More
David -
December 05, 2011
A:

I am in the process of converting our new Kenmore Elite to LP and everything went well up until I went to turn down the spuds for the oven & broiler. The broiler turned about 1 turn and the oven spud won't turn at all. What now?? Sears has been no help at all!

Read More
Bob -
September 09, 2012
See more answers

Top Parts