Model #79072301010 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Burner won't light and flame is low even after manual lighting. Already tried to adjust gas/flame.

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I would suggest that you provide the model # so your expert will be able to provide you the best possible answer. Just click on reply below and the provide the required data.

Read More
Priscilla V -
August 24, 2011
A:

Per the manual - Model 790.7230*,7240* Let me know what additional information you need. Thanks.

Read More
Jon -
August 24, 2011
A:

You could have a problem with the orifice on that burner. Make sure that the installer that converted the range to LP installed the correct orifice. Based on the model number information that you provided, I accessed the LP conversion instructions for model 790.72301010. The LP orifices in that kit are all the same. I provided those instructions in the image below (LP kit part 316542400). Check to make sure that the orifice on that front right burner matches the other orifices. It should be marked 0.93mm. If the orifice on that front right burner is not correct, then it will need to be replaced. If the orifice is correct, check the alignment by placing a 7 mm nut driver on the top of that orifice and making sure that the nut driver sticks straight up. You may need to have the installer visit your home and check that burner. The installer may switch the orifice with one of the orifices of the other burners since they are probably the same (based on the partial model number that you provided). If the right front burner works properly with one of those other orifices installed, then the original orifice was clogged or defective. Replacing or cleaning that orifice should fix your problem in that situation.

If these tips don't help, you could have a problem with the gas valve or other components. Your details seem to indicate that the range is still under warranty. I recommend that you have it serviced under the warranty in that situation. You can call Sears at 1-800-469-4663 (1-800-4MY-HOME) for service.

If the range is not under warranty, you can schedule service through the Sears Home Services website. Here is a link for that website: Sears Home Services .

If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
August 26, 2011
See more answers

Top Parts