Model #79071394700 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Stove Error

A:

Thank you for your question.  I am sorry about the F11 error on your Kenmore 790.71394700 Free Standing Gas Range.   On this range the F11 indicates a stuck or shorted keypad on the control.  To clear this error first remove the power from the oven for 30 seconds and then reaply power to see if the F11 comes back.  If the code comes back then likely you will need to replac the Electroni Oven Control (EOC) .   You can have this problem checked in your home by a Sears technician.  Here is the link: Sears Home Services Oven .

Read More
Fred M -
Sears Technician
September 23, 2013
A:

Thank you for your question.  I am sorry about the F11 error on your Kenmore 790.71394700 Free Standing Gas Range.   On this range the F11 indicates a stuck or shorted keypad on the control.  To clear this error first remove the power from the oven for 30 seconds and then reaply power to see if the F11 comes back.  If the code comes back then likely you will need to replac the Electroni Oven Control (EOC) .   You can have this problem checked in your home by a Sears technician.  Here is the link: Sears Home Services Oven .

Read More
Fred M -
Sears Technician
September 23, 2013
See more answers
Q:

What does F30 error code indicate on my oven?

A:

The F30 error code is indicating an Open oven temperature sensor probe.

Check the resistance of the oven temperature sensor probe at room temperature & compare it to the Sensor resistance chart that I added as an image. The oven sensor probe is located inside the oven cavity which will be protruding from the rear wall of the oven. It will be held in place by 2 screws. Remove the 2 screws and work the sensor out. It will have a quick disconnect plug connected to it. Disconnect it and you will need an ohm meter to check the resistance of the oven sensor probe.

If resistance does not match the Sensor chart replace Sensor Probe. Part number for the oven sensor is 316490000. Check Sensor wiring harness between EOC & Sensor Probe connector to if the sensor itself ohm's to specifications.

Read More
Joey S -
Sears Technician
May 02, 2008

Top Parts