Model #79071389700 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Code on Kenmore Gas Range F11 keeps coming up and stove is beeping

A:

Thank you for your question and I understand your concern.

 The "F11" fault code indicates a stuck or shorted button on the electronic oven control (EOC). Flip the house circuit breaker off to the range or disconnect the power cord and then wait 30 seconds and reapply power. If "F11" recurs, the electronic oven control/clock assembly will need to be replaced.

The clock/ERC can be removed and replaced from behind the control panel. Remove the screws and cover from behind the control panel to access the electronic oven control/clock assembly.  The part number of the clock/ERC is 316418501 for Kenmore range model 790.71389700which can be ordered from Searspartsdirect.com

NOTE: There is an overlay that covers the front of the clock that may need to be replaced as well. The overlay has a self-adhesive backing and when peeled off to put over the new clock, it may not stick very well. You may want to consider order the clock overlay which is part number 316419503 .

The clock/oven control is fastened to the control panel bracket with 4 screws, one screw in each corner.  NOTE: Disconnect the range from the power source before servicing. 

Remove one wire at time from the old clock and transfer the wire to the matching terminal on the new clock.  

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
September 24, 2013
Q:

Have kenmore stove that poofs when it cycles in and out of the preheat and bake cycles

A:

The oven making a strange noise can really cause some concern and I will be happy to help. I did some research and I was able to find a link with a similar question. I hope this helps with your research while you wait for your expert response. 

Read More
Joseph P. -
March 12, 2013
A:

Fixing the leak between the regulator and the safety gas valve may fix your problem. I recommend that you have a service technician install that part and properly leak check the gas line fittings. You can schedule service through this link: Sears Home Services Range Repair.

 

There are times when the oven gas burner will make a "poof" sound as it lights. You can check the ports (or holes) in the gas burner that are in the vicinity the igniter. If those holes are clogged with corrosion or a spill, then the gas will not reach the igniter and light as quickly. This will result in a "poof" sound when the burner ignites. 

 

 

Read More
Lyle W -
Sears Technician
March 13, 2013
See more answers
Q:

Kenmore range access to ignitor

A:

Getting to the ignitors seems to be tricky, but with help from an expert it can be done in no time. The link provided below is on a similar issue which may be helpful while an expert responds to your specific model. If you decide on service, that link is also provided.

Read More
Anna T -
January 21, 2013
A:

I know that it can be very difficult to have issues with your oven ignitor. The images below will provide the instructions on how to remove and change this. If you don't feel comfortable doing this yourself, just click on this link to schedule service: Sears Home Services . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
January 22, 2013
See more answers

Top Parts