Model #79071364700 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Error Code on Oven 79071364700 Kenmore Gas range

A:

Thank you for contacting Sears. I will be more than happy to assist you with your Kenmore range.

I can understand the frustration of your range not functioning properly, after researching model number 790.71364700. the error code F10 you’re receiving indicates a runaway temperature. If oven isn't overheating, check the oven temperature sensor probe and replace if necessary, If oven is overheating, disconnect power. If oven overheats when the power is restored, replace the electronic oven control board. Severe overheating may require replacing the range, if damage is extensive.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
August 05, 2015
Q:

Flames in oven of propane stove. 790.71364700

A:

Thank you for contacting SearsPartsDirect.com with your question about the oven valve on your Kenmore Gas Stove. I am so sorry you are having excessive flames in the oven. I imagine that was a little disturbing. I will be happy to help you with this.

 

The new oven valve you received was set for natural gas. That is the way the manufacturer sets them at the factory. The part needs to be adjusted to work with propane. This is something that should be done by a technician trained to work with gas. Most propane companies can send some one out to complete this adjustment for you. We do not give instructions on how to adjust the part for propane because of the dangers created if it is not set properly.

 

I hope this answers your questions. If I can be of further assistance please respond to this thread. Thank you for choosing Sears, we appreciate your business.  

Read More
Rachel Morgan -
Sears Technician
September 07, 2013

Top Parts